Fusion Trailers: hitch it, load it, launch it
Trailers worked the way they are at a real boat ramp or loading yard. Back up to the ball, lower the coupler, hook the safety chains, plug in the lights and crank the jack up, all by hand. Winch a boat up to the bow stop and float it off at the ramp, strap cars onto a flatbed or a car carrier, and pull doubles behind any semi truck. It works with GTA's own trailers and any add-on trailer your server streams, and every player sees the same rig.
Runs on any framework (Qbox, QB-Core, ESX, ox_core, ND_Core, others, or Standalone), or as an add-on for Fusion Menu, where its settings and permissions are in F10.
Watch it in action: youtu.be/IjQ44XmHyE0
Launch price: $25.79 $30.79
Launch price for the first two weeks.
Hitching by hand
- Back up with a guide: while you reverse, the screen shows how far the ball is from the coupler and which way to steer
- At the coupler, press E for each step: lower the coupler, cross and hook the safety chains, plug in the lights, crank the jack up. G undoes each one to unhitch, and the trailer stays where you leave it
- Bumper-pull and gooseneck: a gooseneck goes on a ball in the bed of a truck built for one, a tongue trailer on a ball behind the bumper. Try the wrong one and it tells you
- Pull away with the jack down, no chains, no lights or a loose load, and the driver gets a warning
Boat trailers: winch on, float off
- Power-load the boat onto the submerged trailer, or bring it in lined up and winch it on. The bunks hold it while you get out
- Hook the strap to the bow eye and hold E to crank it up until the bow sits against the stop, then strap the transom down before you pull out
- Launch: straps off, back into the water and let the winch out. Once there's enough water under the stern, the boat floats off the bunks. Not deep enough, and it tells you to back in farther
- Trailers sink and settle on the ramp instead of floating, and a boat too long for the trailer won't go on it. Personal watercraft ride on boat trailers too
Car and utility trailers: ramps and straps
- Set a pair of aluminum loading ramps down at the back. It picks 6 ft or 12 ft ramps for the deck, so the climb is never steeper than a car can take
- Drive up, get out and press E at each wheel to strap it down. Strap all four before you pull out; the last strap off frees the vehicle to back down
- Trailers with a ramp of their own use it: a ramp or tailgate that folds down or slides out, a ramp that's a vehicle extra, or a built-in beavertail you just drive up
Car carriers
- A vehicle on each spot of either deck, each strapped on its own. They load front to back and come off back to front, as on a real carrier
- GTA's carriers (
tr2, tr4) use their own ramps and upper deck, lowered and raised with a hydraulic control on the driver's side - A second pair of ramps bridges the lowered upper deck's lip, so cars drive up over it
Semis and doubles
- Any semi truck couples to any semi trailer, add-on trucks and trailers included: back slowly under the kingpin, lined up, and the fifth wheel takes it. A trailer that sits low is pulled on instead of shoved around
- To unhitch, hold H in the cab, or press E beside the fifth wheel to pull its release
- Double trailers: a converter dolly goes on the lead trailer's pintle hook and a second trailer on the dolly's fifth wheel. Back the rig in, or roll the dolly by hand
- The rig holds through tight turns and at highway speed, and every wheel rolls
Works with your fleet
- The light plug carries the tow vehicle's lights, brake lights and turn signals to the trailer. Unplugged, it stays dark
- Command and rescue trailers run their emergency lights with the tow vehicle's, with GTA's lights or Fusion Lighting. Light bars that are vehicle extras are always shown. Only the truck sounds its siren
- Add-on trailers of any kind, whatever their vehicle class: anything with a hitch coupler hitches by hand, and bumper or gooseneck is worked out from where it sits
- Works with Fusion Trucking or without it, and shows one prompt at a time alongside every other Fusion add-on
For server owners
- Every setting in game: F10 > Settings > Trailers on Fusion Menu, Fusion Admin Menu (
/fusionadmin), or /trailerssetting Standalone. No config file to edit - Coupler, chain, plug, jack, strap and ramp times, how close the ball must be, winch speed and strap length, the water a boat needs to float off, driver warnings, and GTA's own backing-up hitch on or off
- More trailer models: add your add-on trailers as boat, deck or hitch only, with their own ramp (a door, an extra, always down, or separate ramps), a lowering upper deck and emergency light extras
- Who may use them: everyone, your jobs, or a permission. On Fusion Menu: F10 > Roles & Permissions
- Staff tools:
/spawntrailer, /trailerfree, /trailerparts (finds an add-on trailer's own ramp; /trailerparts measure shows how a model is read) and /trailerfit (fits a boat on its trailer) - Events, hooks and a developer guide
- Every key can be changed, and it updates itself, through F10 > Updates on Fusion Menu or its own updater
Good to know
- Needs OneSync (on by default with txAdmin). No database
- Its own models for the loading ramps, streamed with the script: nothing for players to download
- No truck or trailer models included: it works with GTA's own and the ones your server already streams
- Step-by-step install guide included
- Protected with the Cfx.re Asset Escrow; config.lua and the file for your own framework adapter and hooks stay open for you to edit. Delivered through your Cfx.re keymaster.
Policies
No refunds: this is a digital product and all sales are final. Support is through Discord tickets only: discord.gg/kVRqwDPsnJ.